Environmental Benefits
- High viscosity index performance supports consistent operation across changing temperatures, helping reduce unnecessary system stress.
- Good oxidation stability can help extend lubricant service life under normal operating conditions.
- Anti-wear protection may help extend hydraulic component life, reducing maintenance waste and replacement part usage.
- Cleanliness-supporting performance helps limit deposit formation, which may reduce system contamination and maintenance requirements.
- Good water separation and air release characteristics support efficient hydraulic system operation.
- Suitable for collection through approved used-oil recovery or recycling routes where local regulations and facilities allow.
Environmental Note
Used oil must be handled responsibly. Do not discharge into drains, soil, surface water, or groundwater. Store used oil in suitable containers and dispose of it through authorised waste oil collection or recycling services in accordance with local regulations. |
Typical Characteristics
| Property |
Test Method |
Unit |
Typical Value |
| Density at 15°C |
ASTM D4052 |
g/ml |
0.841 |
| Kinematic viscosity at 40°C |
ASTM D445 |
mm²/s |
15.8 |
| Kinematic viscosity at 100°C |
ASTM D445 |
mm²/s |
4.1 |
| Viscosity index |
ASTM D2270 |
– |
172 |
| Acid number, colorimetric |
ASTM D974 |
mg KOH/g |
0.28 |
| Pour point |
ASTM D6892 |
°C |
-39 |
| Flash point COC |
ASTM D92 |
°C |
162 |
Typical Values
Typical characteristics are average values and should not be treated as fixed sales specifications. |
Safety Precautions
Important
Read the latest Safety Data Sheet before handling or using the product. The information below is general handling guidance and does not replace the SDS. |
Handling
- Avoid prolonged or repeated skin contact.
- Avoid contact with eyes.
- Do not ingest.
- Wash hands thoroughly after handling, especially before eating, drinking, or smoking.
- Use only in applications where the product viscosity grade and performance profile are suitable.
Personal Protective Equipment
- Wear suitable protective gloves when handling the product.
- Use safety glasses or goggles where splashing may occur.
- Wear protective work clothing to reduce skin exposure.
- Ensure adequate ventilation if oil mist may be generated during system operation.
Storage
- Store in the original, tightly closed container.
- Keep containers in a cool, dry, and well-ventilated area.
- Protect from direct sunlight, excessive heat, moisture, and contamination.
- Keep away from open flames, sparks, and other ignition sources.
- Prevent water, dust, dirt, or other foreign matter from entering the container.
Spill Response
- Stop the leak if it is safe to do so.
- Contain spills immediately to prevent environmental contamination.
- Use sand, earth, or another suitable inert absorbent material to collect spilled product.
- Dispose of contaminated absorbent and recovered oil in accordance with local regulations.
- Clean affected surfaces thoroughly, as spilled oil may create a slip hazard.
First Aid Measures
- Skin contact: wash affected skin with soap and water.
- Eye contact: rinse carefully with clean water for several minutes. Seek medical advice if irritation continues.
- Inhalation: move to fresh air if exposed to oil mist or vapour.
- Ingestion: do not induce vomiting. Seek medical advice promptly.
General Note
Product characteristics may be updated as part of ongoing technical development. Users should confirm product suitability for the intended application and refer to the latest Safety Data Sheet for detailed information on hazards, handling, storage, transport, exposure controls, first aid, and disposal.
