Environmental Benefits
- Oxidation-resistant performance can help extend lubricant service life and reduce oil-change frequency.
- Anti-wear protection may help extend hydraulic component life, reducing maintenance waste and replacement part consumption.
- Foam control properties can support efficient hydraulic operation and help reduce fluid losses caused by aeration or overflow.
- Stable viscosity performance helps maintain consistent system operation.
- Suitable for collection through approved used-oil recovery or recycling routes where local regulations and facilities allow.
- Helps reduce avoidable contamination risks when stored, handled, and disposed of correctly.
Environmental Note
Used oil must be collected and disposed of responsibly. Do not discharge into drains, soil, surface water, or groundwater. Disposal should be carried out in accordance with local environmental regulations. |
Typical Characteristics
| Property |
Test Method |
Unit |
Typical Value |
| Density at 15°C |
ASTM D4052 |
g/ml |
0.836 |
| Kinematic viscosity at 40°C |
ASTM D445 |
mm²/s |
10.8 |
| Kinematic viscosity at 100°C |
ASTM D445 |
mm²/s |
2.82 |
| Viscosity index |
ASTM D2270 |
– |
119 |
| Pour point |
ASTM D6892 |
°C |
-33 |
| Flash point COC |
ASTM D92 |
°C |
154 |
Typical Values
Typical characteristics are average values and should not be treated as fixed sales specifications. |
Safety Precautions
Important
Read the latest Safety Data Sheet before handling or using the product. The information below is general handling guidance and does not replace the SDS. |
Handling
- Avoid prolonged or repeated contact with skin.
- Avoid contact with eyes.
- Do not ingest.
- Wash hands thoroughly after handling, especially before eating, drinking, or smoking.
Personal Protective Equipment
- Wear suitable protective gloves when handling the product.
- Use safety glasses or goggles where splashing may occur.
- Wear appropriate protective work clothing to reduce skin exposure.
- Use adequate ventilation if oil mist may be generated during operation.
Storage
- Store in the original, tightly closed container.
- Keep containers in a cool, dry, and well-ventilated area.
- Protect from direct sunlight, excessive heat, moisture, and contamination.
- Keep away from open flames, sparks, and other ignition sources.
- Prevent water, dust, dirt, or foreign materials from entering the container.
Spill Response
- Stop the leak if it is safe to do so.
- Contain spills immediately to prevent environmental contamination.
- Use sand, earth, or another suitable inert absorbent material to collect spilled product.
- Dispose of contaminated absorbent and recovered oil in accordance with local regulations.
- Clean affected surfaces thoroughly, as spilled oil may create a slip hazard.
First Aid Measures
- Skin contact: wash affected skin with soap and water.
- Eye contact: rinse carefully with clean water for several minutes. Seek medical advice if irritation continues.
- Inhalation: move to fresh air if exposed to oil mist or vapour.
- Ingestion: do not induce vomiting. Seek medical advice promptly.
General Note
Product characteristics may be updated as part of ongoing technical development. Users should confirm product suitability for the intended application and refer to the latest Safety Data Sheet for detailed health, safety, storage, transport, and disposal information.
