CALL US +971 54 935 8550
Greases & Transmission
PN: TGO 046

Nordvik TGO 046 ISO 46

Description
Download TDS Sheet

Nordvik EP Gear Oil ISO 46 is a high-performance extreme pressure lubricant formulated for industrial gear systems operating under demanding conditions. Carefully selected mineral base oils provide excellent viscosity stability across a wide temperature range, together with strong resistance to oxidation and oil degradation.

Advanced sulfur and phosphorus extreme pressure additives form a protective film on gear tooth surfaces, helping to minimize wear, reduce friction, and support reliable equipment operation. The formulation also includes corrosion inhibitors and anti-foam additives to promote consistent lubrication performance.

Recommended for the lubrication of industrial gearboxes using oil bath, oil mist, or circulating oil systems.

Suitable for equipment operating under heavy loads, shock loading, and elevated temperatures, subject to equipment manufacturer recommendations.

EP Gear Oil ISO 46 is formulated to support long service life through strong oxidation resistance and wear protection, helping to reduce maintenance frequency and lubricant consumption where operating conditions and manufacturer recommendations permit.

  • Extended lubricant life helps reduce waste oil generation.
  • High wear protection may contribute to longer equipment service life.
  • Good oxidation stability helps maintain lubricant performance over time.
  • Used product should be collected, recycled, or disposed of through authorized waste oil facilities in accordance with local regulations.

SAFETY PRECAUTIONS

Before handling this product, consult the latest Safety Data Sheet (SDS) for complete health, safety, and environmental information.

Handling

  • Avoid prolonged or repeated skin contact.
  • Avoid contact with eyes.
  • Do not ingest the product.
  • Use in well-ventilated areas.

Personal Protective Equipment (PPE)

  • Wear suitable protective gloves during handling.
  • Safety glasses are recommended where splashing may occur.
  • Wash hands thoroughly after handling.

Storage

  • Store in tightly closed original containers.
  • Keep in a cool, dry, and well-ventilated area.
  • Protect from direct sunlight, excessive heat, and sources of ignition.
  • Prevent contamination from water, dust, or other foreign materials.

Spill Response

  • Contain spills immediately using suitable absorbent materials.
  • Prevent entry into drains, waterways, and soil.
  • Dispose of contaminated materials in accordance with local regulations.

Disposal

  • Dispose of used oil and empty containers through authorized waste management facilities.
  • Do not discharge product into sewers, surface water, or the environment.

KEY FEATURES

✓ Excellent extreme pressure (EP) performance ✓ Effective protection against gear wear
✓ Good oxidation resistance ✓ Corrosion protection
✓ Foam control for consistent lubrication performance ✓ Reliable operation under heavy-duty service conditions

TYPICAL CHARACTERISTICS

Property Test Method Unit Typical Value
Density @ 15°C ASTM D4052 g/ml 0.880
Kinematic Viscosity @ 40°C ASTM D445 mm²/s 44
Kinematic Viscosity @ 100°C ASTM D445 mm²/s 6.6
Viscosity Index ASTM D2270 – 101
Acid Number (AN) ASTM D974 mg KOH/g 0.38
Pour Point ASTM D6892 °C -27
Flash Point (COC) ASTM D92 °C 224
FZG Gear Test, Fail Stage DIN 51354 Stage 12

DISCLAIMER

The information in this Technical Data Sheet is based on typical characteristics and is intended as a guide for product selection and application. Product specifications may be updated as part of continuous improvement programs. Always confirm suitability with the equipment manufacturer and consult the latest SDS before use.

Need help choosing the right product?
Our experts are here to help you find the perfect lubricant for your needs.
Contact Us