CALL US +971 54 935 8550
Passenger Vehicles
PN:

GC ULTRA PERFORMANCE 20W-50

Description
Download TDS Sheet

GC ULTRA PERFORMANCE SAE 20W-50 API SL is a premium, high-shear multi-grade motor oil formulated with highly refined Group II base stocks and an advanced thermo-durable additive system. Specially developed to meet the severe operational demands of ambient temperatures across the Kingdom of Saudi Arabia, it provides exceptional thermal stability, resistance to oxidation, and continuous wear protection under high-speed, heavy-load highway driving and extended city idling.

Application Category Recommended Service Life / Drain Interval
On-Road Passenger Cars & Light Commercial Vehicles 5,000 km – 7,000 km (Optimized for Saudi summer temperatures exceeding 45°C)
Stationary Gasoline Engines & Field Water Pumps 200 – 250 Operating Hours (Depending on dust filtration and ambient heat loads)

Note: Actual drain intervals may vary depending on vehicle condition, fuel sulfur levels, severe dust exposure, and OEM engine recommendations.

  • High-Temperature Viscosity Retention: Maintains robust film strength at elevated engine operating temperatures, preventing metal-to-metal contact during peak KSA summers.
  • Thermal & Oxidation Control: Resists oil breakdown, varnish formation, and thermal thickening under severe stop-and-go driving.
  • Enhanced Engine Cleanliness: Active detergent and dispersant chemistry keeps pistons and crankcases free from harmful carbon deposits and sludge.
  • Superior Seal Compatibility: Conditions engine seals and gaskets to prevent leaks in high-mileage and older vehicle fleets.

TYPICAL PHYSICAL & CHEMICAL PROPERTIES

Property Parameter Method Unit Typical Value
SAE Viscosity Grade SAE J300 – 20W-50
Kinematic Viscosity @ 100°C ASTM D445 cSt 18.50
Kinematic Viscosity @ 40°C ASTM D445 cSt 168.2
Viscosity Index (VI) ASTM D2270 – 124
Density @ 15°C ASTM D4052 g/cm³ 0.888
Flash Point (COC) ASTM D92 °C 238
Pour Point ASTM D97 °C -24
Total Base Number (TBN) ASTM D2896 mg KOH/g 7.8
Apparent Viscosity (CCS) @ -30°C ASTM D5293 mPa.s (cP) 6,200
Sulfated Ash Content ASTM D874 % wt 0.85
Evaporation Loss (NOACK) ASTM D5800 % wt 10.5

PERFORMANCE SPECIFICATIONS & STANDARDS

  • API Service Category: SL / CF
  • SASO / GSO Standards Compliant (Saudi Standards, Metrology and Quality Organization)
Need help choosing the right product?
Our experts are here to help you find the perfect lubricant for your needs.
Contact Us